Aerial view of a large Powervault enclosure installation, rows of specialised enclosures with access walkways and stairs on site.

The plant — our strongest asset.

A dedicated plant being built to take an enclosure from steel to finished product under one roof, with robotic welding, a C5M paint booth and precision pneumatic jigs.

HOME / MANUFACTURING
Production line

From coil to dispatch.

Twelve controlled stages, from incoming steel coil to customer inspection and dispatch.

01

Decoiling

Steel coil is received to specification and unwound into flat sheet, traceable by heat number.

02

Slitting and cutting

Coil is slit and cut to the exact sizes required for each part of the container.

03

Sheet blasting and primer

Sheet is blasted and primed to 25 µm, the primer thickness limit that still allows clean welding.

04

Shearing, notching and forming

Shearing, notching and press brakes form the sheet into the finished components.

05

Sub-assembly

Every weldment is held in a fixture, so dimensional accuracy is maintained from the first sub-assembly.

06

Main assembly

The complete enclosure is welded in fixtures, with robotics at every station where it is feasible. Procedures developed to EN 1090 / ISO 3834.

07

Blasting

The assembled enclosure is blasted to the surface standard the coating system requires.

08

Auto painting

The ISO 12944 C5M coating system, applied and oven-cured in a dedicated booth.

09

CSC testing

Structural and water-ingress testing before the enclosure leaves the line. ISO 1496-1 type approval in progress.

10

Fit-out

Internal systems and fittings installed to the customer’s specification.

11

Customer inspection

Your team inspects and signs off the finished unit at our works.

12

Dispatch

Final documentation, packing and loading for transport.

~10 acres
Site area
~16,000 m²
Factory floor area
Equipment

What the line is built around.

The line, by function — from incoming steel through to the C5M paint and bake line.

Cutaway render of a steel engine enclosure assembly, showing the internal fit-out and access layout.

Sheet & plate intake

Cut sheet and plate for structural and cladding steel, received to specification and traceable by heat number.

Shearing

Precision length and width cutting ahead of forming.

Press brakes

Structural forming for panels, frames and brackets.

Shot blast + 25 µm primer

Surface preparation and primer coat ahead of fabrication.

Roof press & corrugation

Structural roof forming for transport and stacking loads.

Robotic & semi-automated weld cells

Repeatable structural welding, with procedures engineered to EN 1090 / ISO 3834.

Blast / paint / oven-bake line

The ISO 12944 C5M coating system, applied and cured in a dedicated booth.

Structural test & water-ingress test

Testing before an enclosure leaves the line. ISO 1496-1 type approval in progress.

Phasing

Built to scale.

The plant is laid out for specialised enclosures and E-houses, with floor space reserved for added capacity as demand grows.

Two Powervault enclosures at dusk, one open showing internal fit-out.
Get a technical response

Send us a specification and we will come back with a technical response.

Application, sizing, coating grade and governing standard — the more you give us, the faster we can price it.