Two Powervault enclosures at dusk — one open showing internal fire suppression cylinder and electrical panel, the other fitted with external HVAC condenser units.
Specialised steel enclosures

Specialised enclosures and E-houses. Steel to finished enclosure, under one roof.

BESS · data centre gensets · diesel & gas gensets · compact substations. Built on robotic welding, an ISO 12944 C5M paint system and precision pneumatic jigs.

Robotic & semi-automated welding

Repeatable structural welds, with procedures engineered to EN 1090 / ISO 3834.

C5M marine-grade paint system

ISO 12944 C5M high-corrosivity coating system, applied and cured in a dedicated booth.

BESS Data centre gensets Diesel & gas gensets Compact substations
One envelope, three disciplines — steel shell, structural weldment and electrical provisions, under one roof.
Skip the assembly animation
Steel to finished enclosure

Watch an enclosure come together.

  1. 00 / 06

    Steel intake

    Every enclosure starts as plate and section steel, drawn in to one plant.

  2. 01 / 06

    Base frame

    Bottom rails and cross-members are cut and fixed in precision jigs first, so the footprint starts square.

  3. 02 / 06

    Corner posts and castings

    ISO-format posts and corner castings lock the footprint. Engineered to ISO 1496-1; type approval in progress.

  4. 03 / 06

    Corrugated shell

    Corrugated walls add stiffness without added weight, welded on procedures engineered to EN 1090 / ISO 3834.

  5. 04 / 06

    Roof and door end

    Roof panels, door leaves, hinges and locking bars come off jigs built to Powervault drawings, so they fit first time.

  6. 05 / 06

    Fit-out

    Cooling units, cable gland plate, fire suppression and electrical provisions go in under the same roof.

  7. 06 / 06

    C5M finish

    ISO 12944 C5M coating system, applied and cured in a dedicated booth. Finished enclosure, ready for the yard.

    Send an enquiry
What we build

Four enclosure families, engineered as one discipline.

Steel battery energy storage enclosure with an open battery rack bay on a concrete plinth, beside solar panels and wind turbines at sunset.

BESS enclosures

Battery energy storage enclosures built to survive thermal, fire and duty-cycle demands over a multi-year field life.

View enclosure →
Rows of Powervault genset enclosures stacked on a steel gantry with access stairs and guard rails, in a data centre power yard.

Data centre genset enclosures

Genset enclosures engineered against the acoustic and availability specification set by the facility.

View enclosure →
Cutaway view of a steel generator enclosure showing the engine, alternator, exhaust silencer and control panel on a concrete pad.

Diesel & gas genset enclosures

Acoustic genset enclosures for standby and prime power, sized and finished to the site they will stand in.

View enclosure →
Powervault compact substation and E-house enclosure.

Compact substation & E-house enclosures

Switchgear and transformer enclosures built for utility and industrial deployment, documented for empanelment.

View enclosure →
Why the process matters

Four things we control in-house.

01

Steel-to-finished, in-house

Full process control and traceability from incoming steel to painted, tested enclosure. No sub-contracted quality gaps, and one point of accountability for schedule.

02

Robotic & semi-automated welding

Repeatable structural welds, with procedures engineered to EN 1090 / ISO 3834 — not job-shop hand welding. Weld quality is one of the leading causes of field failure in steel enclosures.

03

C5M marine-grade paint system

ISO 12944 C5M high-corrosivity coating system, applied and cured in a dedicated booth. Coastal and industrial sites quickly expose an under-specified coating.

04

Precision jigs & fixtures

Customisable pneumatic jigs, designed to Powervault drawings, for dimensional accuracy and interchangeability. Doors, glands and equipment fit first time on site, and replacement parts are interchangeable.

Current projects

The products we are currently making.

These are currently under design and execution.

Battery storage

BESS enclosures

For multiple leading companies in India.

View enclosure →
Data centre

Genset enclosures

Containerised data-centre genset enclosures for two leading global genset OEMs.

View enclosure →
Export

1250 kVA powerpack

A containerised powerpack in a 20 ft enclosure for the Middle East market.

View enclosure →
Renewables

CSS enclosures

Export-ready containerised substation enclosures, in 20 ft and 40 ft designs, for renewable energy companies.

View enclosure →
40+ years of European power-enclosure design experience
Design partnership

Engineered with European design pioneers.

We have tied up with European designers who have been in the business of making power enclosures for over 40 years, and who are among the pioneers in the field. Their engineering and vast experience go into every Powervault design.

Already proven. The first few projects we have worked on have saved customers space and cost.

Production line

From coil to dispatch.

Twelve controlled stages, from incoming steel coil to customer inspection and dispatch.

Aerial view of the Powervault Containers plant: a large fabrication hall with gantry cranes, forklifts and rows of steel enclosures and frames in the yard.
01

Decoiling

Steel coil is received to specification and unwound into flat sheet, traceable by heat number.

02

Slitting and cutting

Coil is slit and cut to the exact sizes required for each part of the container.

03

Sheet blasting and primer

Sheet is blasted and primed to 25 µm, the primer thickness limit that still allows clean welding.

04

Shearing, notching and forming

Shearing, notching and press brakes form the sheet into the finished components.

05

Sub-assembly

Every weldment is held in a fixture, so dimensional accuracy is maintained from the first sub-assembly.

06

Main assembly

The complete enclosure is welded in fixtures, with robotics at every station where it is feasible. Procedures developed to EN 1090 / ISO 3834.

07

Blasting

The assembled enclosure is blasted to the surface standard the coating system requires.

08

Auto painting

The ISO 12944 C5M coating system, applied and oven-cured in a dedicated booth.

09

CSC testing

Structural and water-ingress testing before the enclosure leaves the line. ISO 1496-1 type approval in progress.

10

Fit-out

Internal systems and fittings installed to the customer’s specification.

11

Customer inspection

Your team inspects and signs off the finished unit at our works.

12

Dispatch

Final documentation, packing and loading for transport.

~10 acres
Site area
~16,000 m²
Factory floor area

Built to scale. The plant is laid out for specialised enclosures and E-houses, with floor space reserved for added capacity as demand grows.

See the full production flow →

Standards & quality

Engineered to. Not implied.

What we engineer to, and where each item genuinely stands today.

StandardScopeStatus
ISO 668 / ISO 1496Dimensions, ratings and structural testing (ISO Series 1 format)Engineered to — ISO 1496-1 type approval in progress
EN 1090 / ISO 3834Structural steelwork and welding qualityEngineered to — certification planned
ISO 5817 / ISO 9606Weld quality levels and welder qualificationEngineered to — welder qualification to ISO 9606 at plant start-up
ISO 12944 C5MHigh-corrosivity marine coating systemEngineered to — coating system per paint supplier's C5M specification
ISO 1461Hot-dip galvanizingSpecified where required — by approved galvanizer
IS 800 / IS 2062Indian structural steel design and materialEngineered to
IEC 61439Low-voltage switchgear and controlgear assemblies — enclosure provisions, where housedEngineered to
IEC 62619Safety of secondary lithium cells and batteriesCustomer scope — cell and battery-system certification sits with the integrator
IEC 62933Electrical energy storage systemsDesign reference — enclosure requirements addressed; system compliance with integrator
UL 9540 / NFPA 855ESS safety and installation contextDesign reference — system listing with integrator
IEC 62271-202High-voltage / low-voltage prefabricated substationsEngineered to — type test per customer requirement

Certification scope is confirmed per customer requirement at order stage.

Get a technical response

Send us a specification and we will come back with a technical response.

Application, sizing, coating grade and governing standard — the more you give us, the faster we can price it.